BlastMaster B80
A compact crawler blast hole rig for quarries and small mines. DTH hammer drilling for straight production holes, with remote-control tramming and dust collection for work near the face.
BlastMaster B80 specs
| Hole diameter | 3–5 in (76–127 mm) |
|---|---|
| Drilling depth | Up to 66 ft (20 m), multi-pass |
| Single pass | 12 ft (3.66 m) rods |
| Hammer | DTH, 3–4 in class |
| Carrier | Crawler, remote-control tramming |
| Dust control | Dust collector fitted |
| Power | Diesel hydraulic |
| Angle drilling | Tilt mast for bench and face work |
Specifications are as supplied by the manufacturer. Actual performance depends on geology, drilling method and site conditions.
Questions
What hole sizes does the B80 drill?
Production blast holes from 3 to 5 inches (76–127 mm), the standard range for quarries and small open pits.
How deep can it drill?
Up to 66 ft (20 m) in multiple passes with 12 ft rods, covering typical bench heights.
Is dust controlled?
Yes, a dust collector is fitted. That matters for silica exposure rules on quarry and mine sites.
Can the operator stand clear of the face?
Yes. Tramming is remote-controlled, so the operator positions the rig from a safe spot.
How is it priced?
Quoted per order, including shipping to your location. Ask about fleet and government rates.
Built for
Quarries
Bench drilling for aggregate and dimension stone operations.
Small mines
Production holes for open pits that do not justify a full-size drill fleet.
Construction & road cuts
Pre-split and production drilling for highway and site work.
Also see the Aquilon 450C and TerroCore ZY-40, or all equipment.
Need a quote?
Tell us your site, quantity and destination. We quote the BlastMaster B80 with shipping.